README.TXT 12th January 1995 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ DRIVESAFE HYPERTEXT - GUI VERSION ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ The GUI (graphical user interface) version of the DriveSafe Hypertext v1.52 is now distributed in 2 ZIP files DS152G-1.ZIP & DS152G-2.ZIP A text based version of this hypertext is also available. Look for the files DS152T-1.ZIP & DS152T-2.ZIP. Version 1.52g: ù is a minor update to v1.51g publicly released in February 1994, ù corrects a few minor bugs, ù will be replaced by v1.6 in the near future so that changes in 1994 to road law in Western Australia can be incorporated. PLEASE NOTE: ------------ The DriveSafe Hpertext is based on the 3rd edition of the DriveSafe Handbook which is printed and published by the Traffic Board of Western Australia. This hypertext is not intended to be a replacement for the handbook. Although the hypertext contains specific references to road law only applicable in Western Australia, the general content of the material is also consistent with that applied in other Australian states. However all Australian users are advised to contact their local driver licensing center or authorities for a copy of the driver education publications applicable in their state. International users are advised that the material presented in this hypertext may not be suitable for their specific use. These users should also contact their local or regional driver licensing authorities for a copy of the relevant driver education publications. REQUIREMENTS: ÍÍÍÍÍÍÍÍÍÍÍÍÍ ù IBM PC or compatible (XT or higher), . 640K RAM memory, ù at least 1.2 megabytes of free hard disk space, ù VGA or SVGA video monitor, ù (optional) Microsoft compatible mouse. The graphical version of the DriveSafe Hypertext has been designed to run on a PC with a colour VGA monitor. It will run on a mono VGA using 16 shades of grey but should you experience any difficulties with this please let us know (see below for contact details). The hypertext can also be run from a floppy disk and we have kept it's size down so that it can fit on either a 1.2 or 1.44 meg floppy. Please note that because of it's graphical nature, the program will run slowly when from a floppy disk. FILE LIST: ÍÍÍÍÍÍÍÍÍÍ 1) File DS152G-1.ZIP should contain the following: filename.ext size date time ------------------------------------------ CHARB5 EXE 2,714 12-01-95 1:52a CHR000 UDG 2,056 12-01-95 1:52a CHR100 UDG 3,592 12-01-95 1:52a CHR200 UDG 4,104 12-01-95 1:52a COVER PCC 66,717 12-01-95 1:52a DS ICO 766 12-01-95 1:52a DS CFG 704 12-01-95 1:52a DS-152G HCM 132,126 12-01-95 1:52a DS-152G HIX 12,001 12-01-95 1:52a DSAVE COM 1,068 12-01-95 1:52a HG EXE 49,971 12-01-95 1:52a LIB1 HLB 48,654 12-01-95 1:52a LICENSE TXT 5,162 12-01-95 1:52a README TXT 8,931 12-01-95 1:52a RESTART HSF 0 12-01-95 1:52a SEAT PAL 48 12-01-95 1:52a SPECREF DAT 6,191 12-01-95 1:52a STD PAL 48 12-01-95 1:52a ------------------------------------------ 18 file(s) 344,878 bytes 2) File DS152G-2.ZIP should contain the following: filename.ext size date time ------------------------------------------ DSLIB HLB 813,790 12-01-95 1:52a README TXT 8,931 12-01-95 1:52a ------------------------------------------ 2 file(s) 822,721 bytes ------------------------------------------------------ INSTALLATION UNDER DOS: ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ 1. If you are updating from a previous version of DriveSafe, please jump to step 3. 2. Make a directory called DRVSAFE (or your favourite alternative) on your hard disk. 3. Change to this directory. 4. a) If you have already extracted the contents of the 2 ZIP files into a temporay directory, simply move all of the files into this directory. b) Otherwise, copy the 2 ZIP files into this directory and extract their contents using PKUNZIP v2.0. Note: If you wish to keep a copy of the archives, please ensure you copy them to floppy disks before deleting from your hard disk. 5. When all of the files have been extracted, DriveSafe is ready to GO!. ------------------------------------------------------ INSTALLATION UNDER WINDOWS: ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ 1. Follow the Steps 1 to 5 for a DOS installation. 2. Add the provided icon file (DRVSAVE.ICO) to your favourite workgroup and link it to the DRVSAVE.COM file in the DriveSafe directory. Note: The DRIVESAFE hypertext must run in a full DOS screen. ------------------------------------------------------ INSTALLATION UNDER OS/2: ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ 1. Follow the Steps 1 to 5 for a DOS installation. 2. Then refer to your OS/2 manuals on how to install a DOS based graphical program on the OS/2 Workplace Shell. ------------------------------------------------------ EXECUTION: ÍÍÍÍÍÍÍÍÍÍ UNDER DOS ù Change directory to that where the DRIVESAFE files --------- can be found. (ie. CD C:\DRVSAFE) ù Type DSAVE and press the 'enter' or 'return' key. Windows & OS/2: ù Simply click the DRIVESAFE icon in the workgroup -------------- folder or the Workplace Shell. This application is very user friendly and will behave in a sensible manner under almost all conditions. So go right ahead, explore, press keys or use the mouse to navigate through the knowledge contained in the hypertext. As a guide, you can expect to keep discovering new things about this hypertext for many hours. ------------------------------------------------------ HISTORY: ÍÍÍÍÍÍÍÍ ??/02/95 v1.60g } ù incorporate changes to Road Law in 1994. v1.60t } 03/01/95 v1.52g } ù minor bug fixes. v1.52t } 02/02/94 v1.51g } ù official public release v1.51t } ù only GUI version distributed to High Schools in W.A. 31/12/93 betas ù not publicly released 30/11/93 alphas ù not publicly released NOTE: vx.xxg = Graphical interface version vx.xxt = Text interface version (with graphic iamges) ------------------------------------------------------ DEVELOPERS: ÍÍÍÍÍÍÍÍÍÍÍ ù Hyperware Research Laboratory (HRL) Curtin Business School, Curtin University of Technology, GPO Box U1987 Tel: +61 (09) 351-3060 Perth Fax: +61 (09) 351-3076 Western Australia 6001 Contact: Heinz Dreher e-mail: dreher_h@cc.curtin.edu.au ù Tembo Software PO Box 47 Tel: +61 (09) 341-2545 Karrinyup Fax: +61 (09) 341-2545 (or 446-2786) Western Austalia 6018 Contact: John Strong e-mail: strongj@acslink.net.au ù Palmer Management PO Box 6523 Tel: +61 (09) 364-1243 East Perth Fax: +61 (09) 364-8483 Western Australia 6004 ------------------------------------------------------ WHO TO CONTACT: ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Please feel free to contact either Hienz Dreher or John Strong if you: ù have found a bug in, or experienced a problem with this hypertext, or ù would like assistance in developing a similar hypertext, or ù want to know more about the HyperShell Hypertext Control System as used in the DRIVESAFE Hypertexts. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ John Strong ³ .ùùù..--..ùùù. ³ ³ Tembo Software ³ : o o : Tembo Software is ³ ³ Hypertext & Multimedia Development ³ ` ( ) ' pleased to be a ³ ³ PO Box 47, Karrinyup ³ `. //( )\\ .' co-developer of the ³ ³ Western Australia, Australia ³ //.( ).\\ DriveSafe Hypertext. ³ ³ ³ \\ () // ³ ³ e-mail: ³ () ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ